A quick glossary
Three words come up constantly and almost nobody uses them in normal life. The fascia is the flat board facing you at the edge of the roof. The soffit is the underside, the panel you see when you stand under the overhang and look up. The eave is the whole overhang, where the roof extends past the wall.You will not need this vocabulary often, but it appears in every estimate, and it is easier to compare two quotes when both are describing the same part of the building. When somebody says the channel mounts under the soffit, you now know what part of the house they are pointing at.
The reason for that spot
The mounting line was not chosen for looks alone, it is where the constraints line up. The eave runs the full width of the house, so a run there has length to work with. It is high enough to throw light down the wall, and the overhang shelters the hardware.
The direction the light points
Where exactly the channel sits is a real design decision. Mounted under the soffit, it throws down the face of the house, which lights the building itself. On the face, the effect is a bright edge. Neither is automatically better, and the answer depends on your roof and your goal.Where the channel sits changes how far the light travels down the face of the house, which is a bigger difference than most people expect.
Not every house is straightforward
Overhang depth is not standard, and it affects what is possible. A deep overhang hides the run and protects it, but it also shades the wall below. With little overhang, the fascia often becomes the answer. This is why designs get drawn at the house rather than from a satellite image.
What the eave line is worth on an ordinary night
A lit eave line does real work on a normal evening. It puts light on the walk, the drive and the front door, so people can see where they are going. A house with a lit edge reads as occupied and cared for.
A practical scheduling note
The eave line is crowded. Any planned roof work changes the sequence. Doing it backwards costs a second visit. It is worth mentioning even if the roof work is only a maybe.
Upper runs
A single story house presents one eave. A two story has a choice to make. The upper roofline gives you the strongest outline, because it is highest and has the most sky behind it. The lower run is the functional one. Running both is often the answer, and it can be phased.
Getting a plan
The mounting decision is made at the house, not on a phone call. EverCrest Lighting runs permanent LED lighting along
https://rentry.co/or899qwo rooflines and eaves for homes and businesses across Upstate South Carolina and Western North Carolina, from Greenville. Consultations are free, and the plan is built around your building. Call (864) 252-1732 or email
[email protected].